开窗-推杆系统TwinCabrio rail mechanism.pdf

VAN DER VALK SYSTEMEN COMPANY ON THE MOVE The durability of greenhouses mainly relies on the components that slide, clamp, push, pull and turn. After all, these are the components that ensure that your greenhouse keeps moving. This is why all moving components from Van der Valk Systemen have at least one thing in common each and every one of them is of the highest possible quality. It’s not surprising that Van der Valk Systemen has been the market leader for years in the field of vent opening systems and materials for screening installa- tions for the greenhouse industry, and it’s also been the source of the most important innovations for just as long. MECHAUNIQUE THE BEST VENTILATION MECHANISM FOR CABRIO GREENHOUSES Is your crop suitable for cultivation in a Cabrio greenhouse Are you considering building such a greenhouse Then the new T winCabrio rail mechanism from Van der Valk Systemen is certainly worth looking at. The system is distinguished by two push-pull tubes placed one above the other and an unique patented telescopic construction. The TwinCabrio rail mechanism offers you the maximal range of ventilation possibilities and is the best ventilation mechanism for your Cabrio greenhouse. LARGE VENTILATION COMPARTMENTS The TwinCabrio rail mechanism has an unique construction, with the push-pull tubes for independent operation of the two halves of the roof installed not side by side but one above the other. In this manner the two sets of push rods the upper and lower push-pull tube, respectively run through each other, and the screen can freely fit against the truss. The push-pull tubes of the T winCabrio rail mechanism have a larger diameter than ‘normal’. This makes them stronger, so larger ventilation compartments can be created with fewer motors and less wiring. The calculations for the T winCabrio rail mechanism are prepared for each situation by an unique calculation programme commissioned by Van der Valk Systemen and developed by TNO Bouw. This programme calculates the forces rted on the entire mechanism and the space required between the two sets of push rods. Thanks to this tool, the free movement of the push rods can be guaranteed.To ensure the required stability, the TwinCabrio rail mechanism incorporates the Stabimax vent-opening mechanism and the Valk-Plus window push rods, two important innovations from Van der Valk Systemen that are already being used around the world. The Stabimax system consists of a hinge element that with its cunning holds the push rods in an iron grip. Plus a unique clamp that is wide enough to easily absorb the tolerances of your greenhouse and is absolutely torsion-free. The Valk-Plus push rods are made exactly to measure to your specifications according to a new and completely automated production process. They are treated in several unique ways to make them distinctive for their functionality and ease of mounting. PATENTED TELESCOPIC CONSTRUCTION A Cabrio greenhouse combines the benefits of cultivation in a greenhouse with the benefits of cultivation in the open air. But then the greenhouse roof must be able to open fully and remain stable. Van der Valk Systemen developed a clever telescopic construction for the ends of the push-pull tubes. With this com- pletely rolling construction, long lengths are possible without the push-pull tube being subject to twisting. The TwinCabrio rail mechanismTwo push-pull tubes mounted one above the otherFewer motors and less wiringCompletely rolling telescopic constructionScreens possible on top tubeDurable thanks to the use of the Stabimax ventilation mechanism and Valk-Plus push rods With the TwinCabrio rail mechanism, the two window push rods run through each other on the lower and upper push-pull tube, respectively. An unique calcula- tion programme commissioned by Van der Valk Syste- men and developed by TNO Bouw precisely calcu- lates the space they require for each situation. Friction is eliminated and operational safety guaranteed. A clever, patented telescopic construction completely rolling at permits long lengths and prevents twisting of the push-pull tube, thus minimalising the forces rted on the greenhouse structure. V02-2014 Van der Valk Systemen BV, Zwartendijk 73, 2681 LP Monster, The Netherlands, tel. 31 0174 21 22 23, fax 31 0174 24 27 27, www.valksystemen.nl, infovalksystemen.nl. DEVELOPER AND PRODUCER OF VENTILATION AND SCREENING SYSTEMS FOR GREENHOUSES. CONTACT VAN DER VALK SYSTEMEN OR YOUR GREENHOUSE BUILDER/INSTALLER FOR MORE INATION. Patented